Revo Connect ~ A modular system for storing Revo nozzles
Revo Connect ~ A modular system for storing Revo nozzles — Image 2 of 5
Revo Connect ~ A modular system for storing Revo nozzles — Image 3 of 5
Revo Connect ~ A modular system for storing Revo nozzles — Image 4 of 5
Revo Connect ~ A modular system for storing Revo nozzles — Image 5 of 5
3D model · Printables

Revo Connect ~ A modular system for storing Revo nozzles

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STLSTEP
  • 352 Likes
  • 2 691 Downloads
  • 178 Makes
  • 204 Comments
  • 7 744 Views

Author:E3D

Published

Download on Printables

Description

MODEL DETAILS

Modular, customisable nozzle holders for RapidChange Revo nozzles. Mounting options for different printers can be found on our Printables profile.

Size Information: Each Revo Nozzle is engraved with its size. It can be found by removing the sock.

- 0.15 Nozzle = Pink Sock - 0.25 Nozzle = Yellow sock - 0.4 Nozzle = Red sock - 0.6 Nozzle = Blue sock - 0.8 Nozzle = Green sock - 1.0 Nozzle = Black sock - 1.2 Nozzle = Purple sock - 1.4 Nozzle = Orange sock

RECOMMENDED PRINT SETTINGS

These are the recommended print settings. Tolerances may still work with larger Nozzles/Layer heights but you will lose some of the finer details.

- 0.4 Nozzle or smaller - 0.2 Layer height or smaller - No support material is required. DESIGNER

Designed by Will Hardy.

Check out E3D!

Tags

prusaprusai3mk2nozzlee3dprusai3mk3nozzlesnozzleholderprusaupgraderevoprusaupgradesrevohemerarevosixrevomicroe3drevorapidchangerapidchangerevoe3drevomicrorevocrealityrevovoronrevocr

Comments 0

Loading comments…

More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.