Mellow Fly ADXL345 USB Mount extruder Elegoo Neptune 3/4/Pro with linear Rails

Buyed a Fly-ADXL345-USB for getting Input Shaping active for Klipper and want to mount it on the Head, without getting issues.

Items: Fly-ADXL345-USB from here: https://mellow-3d.github.io/fly_adxl345_usb_general.html If you like to use it with Klipper, bu sure to flash the firmware. https://mellow-3d.github.io/fly_adxl345_usb_klipper_usb.html

If you have trouble to get the firmware flashed, change the settings in the make menuconfig to (No bootloader) this will create a Klipper.uf2 that can be copied on a Windows PC or Mac to the mounted ADXL345. It is also very easy and fast if you like to flash multiple devices.

Parts needed:

2 Screws M3x8 (to fix the ADXL345 on the printed part) 2 Screw Nuts M3 (to fix the ADXL345 on the printed part) 2 Allen Screws M3x18 to mount on the rail.

To avoid crash or other problems with homing when the USB-C cable is plugged in, install the component so that the USB port faces left or right. Both orientations work fine with this model.