Ryobi ONE+ 18V Wall Mount – Modular 2-Part System
Ryobi ONE+ 18V Wall Mount – Modular 2-Part System — Image 2 of 3
Ryobi ONE+ 18V Wall Mount – Modular 2-Part System — Image 3 of 3
3D model · Printables

Ryobi ONE+ 18V Wall Mount – Modular 2-Part System

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STL
  • 18 Likes
  • 48 Downloads
  • 0 Makes
  • 0 Comments
  • 257 Views

This model on other platforms

Author:AWT Works

Published

Download on Printables

Description

A modular wall mount system for Ryobi ONE+ 18V tools, designed and tested to fit the following tools:

- Drill/driver

- Reciprocating saw

- Belt sander

- Impact

The system uses two parts:

- Tool holder: Interfaces with the Ryobi ONE+ battery slot to hold the tool securely. Fastened to the wall bracket using 3× 3.5×10mm coarse thread screws.

- Wall bracket: Mounts directly to the wall with screws.

Note: Fitment is verified only for the tools listed above. Other Ryobi ONE+ 18V tools may or may not fit. If your tool requires a different holder geometry, a custom bracket can be designed to work with the same wall plate.

For the reciprocating saw, only the tool holder is needed – no wall bracket required.

Print settings:

- Material: PETG recommended (PLA+ works indoors)

- Infill: 15%+

- Supports: Not required

- Layer height: 0.2mm

Hardware required:

- 3× coarse thread screws, 3.5×10mm (per tool holder)

- 3× screws for wall bracket

Tags

modularwallmountworkshoporganizationgaragetoolholdertoolstorageryobi18vdrillholder

Comments

Loading comments…
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.