Prusa CORE One ? (Mimic Skin)

I wanted to make a Mimic version of the CORE One long time ago (almost as soon as the printer was released) but the project was quickly replaced by others and was almost forgotten.

The "Skin" contest was a good opportunity to start over and make it better.

PRINT TIPS

Every parts are already oriented and optimized for the printer!

No support needed!

I recommand printing teeth with Z seam set on "REAR".

ASSEMBLY

- Upper Gum that comes with their set of teeth.

- Requires 2 * 10x5mm magnets each

- Lower Gum that comes with their set of teeth.

- Requires 2 * 10x5mm magnets each

- Eyes :

I used white tack to secure it in place

- Plate L

- You will need 4 to make it as on the pictures

- It require 2 * 10x5mm magnet for each plate

- Plate S

- Made to be placed at the bottom of the printer

- You will need 2 to make it as I did

- It requires 1 * 10x5mm magnet

- Plate Lock 1

- Placed in the door handle

- Requires 1 * 10x5mm magnet

- Plate Lock 2

- Placed on the side of the printer next to Plate Lock 1

- Requires 1 * 10x5mm magnet

- Lock and Lock buckle

- Pieces 1 & 2

- Those are optional, it was meant to make a great picture and to mimic a chest

HARDWARE

To make the exact same Mimic as mine you will need

- Glue

- White tack (optional)

- 16 * 10x5mm magnets

- All the printed parts (see above and in description of every part for the quantity)

COMMENTS

I hope you will like it, don't hesitate to give me feedbacks or ask anything like other magnet sizes! :)

Happy printing!

SUPPORT ME!

If you want to support me, don't hesitate to like and download the files so I can earn some prusameters or consider using my referal code when buying a printer: @ScottWolfs :)