Filter slot covers for Flashforge AD5X / Adventurer 5M / AD5M Pro

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store

Check out my other AD5X replacement parts, mods and upgrades (all free!).

Replacement panels for your AD5X or AD5M (Pro)'s filter slots.

Enclosed, haven't installed the ducts and these slots are just air gaps? Print out the solid cover and seal them up.

Got recirculation and exhaust fans installed? Use the "minimal" cover to allow more airflow than the stock covers.

Uses a different clip mechanism from Flashforge's STL; this one is designed to be printed lying down, rather than having to print such a thin piece standing upright.

Print settings:

- ABS recommended. PETG also acceptable. Don't use PLA.

- Orient as in the STL files

- Classic wall generator

- At least 2 wall loops

- Supports on, type "Normal (auto)", style "Snug". The amount of support generated is extremely small, but it is necessary.

- Make sure your XY shrinkage is dialled in. Or at least look up a "usually good" value for the material you intend to use.

The side that prints facing down, is the side that faces out when the plates are installed.

Note: The files are labelled AD5X because that's what I have and what I've personally tested them on, but as far as I am aware, this part is completely identical across all three printers so should fit them all.