Spinning battle tops - 100% printable - no support - collection - video

Spinning battle tops - 100% printable - no support - collection - video

Battle-ready: Modular tops with mix-and-match parts. Easily replace individual damaged blades in seconds.

The drive, cone, and tip remain identical across the board, making all discs universally compatible. Choose from 4, 6, or 8 blades for any battle top—or mix and match them to create your own custom setup.

The higher the infill, the longer it spins and the better it performs in battle.

Hand-tighten the drive until you hear 2 to 3 clicks.

I recommend using PETG.

All .stl files are in the right orientation for printing.

Use the included STEP file to customize the disk and blades with your own design.

Dimensions:

- Diameter 90 mm

- Height 76 mm

Settings blades & tip:

- 2 perimeter

- 0,2 layer hight

- 100% infill

- no support

Settings cone, cords & drive:

- 3 perimeter

- 0,2 layer hight

- 15 % infill

- no support

Settings disks & handles:

- 2 perimeter

- 0,2 layer hight

- 15 % infill

- no support

Model printed with:

- Prusament PETG prusa pro green

- Prusament PETG lipstick red

- Prusament PETG anthracite grey

- Prusament PETG urban grey

- Prusament PETG jet black