DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

- Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers.

- Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini !

- Silent Setup with 5015 Blower and 40x40 axial Fans.

- Detailed build instruction and Bill of Material in attached PDF Document!

- Over 1,5 years of usage and evolution as this design started with the Beta Phase of the E3D Revo Micro

Looking for additional printers and testers! I want to expand the list of compatible printers.

Release Notes:

- Uploaded STEP and Fusion 360 Archive for your own modification needs. Please be aware that this is a complicated fusion file, as I included all variants inside one fusion 360 file, to work with the non-commercial fusion version.

0.2a

- optimized part- and hotend-cooler for better printability, more height and space from the nozzle. It is possible to exchange the revo nozzle without removing any part cooler. - Running “in production” for 6 months. 0.1a

- Slight change on the diameter of the screw holes of the hotend cooler to a more firmly connection of the Sherpa Mini. - Removed one fan shroud blade to ease up cable ties at the hotend cooler exhaust. - Enhanced printability of the part cooler. Reduced shrouds and optimization for slicers (mostly bridge issues with PETG and ASA) - Added additional mounting holes for the Sherpa Mini (Creality Adapter Plate) 0.1

- Initial Release