Clip-A-Cap (Modular Hat Clip + All Accessories)

Here's the full description with all em dashes removed:

Clip-A-Cap is a Swiss Army knife for your hat: 7 snap-on tools, one base clip, zero hands needed.

Clip-A-Cap is a modular mounting platform that transforms almost any headwear (baseball caps, straw hats, thick winter beanies, and more) into a versatile, hands-free tool station. Built on a specialized "Claw & Ball" friction-fit system , the possibilities for customization are virtually endless.

Whether you're working, reading, or exploring, Clip-A-Cap keeps everything within reach and your hands completely free.

This upload combines the full system in one place: the Base Hat Clip and all seven current attachments.

🧢 How the System Works

- Print the Base Hat Clip first. It's the foundation of the entire system and clips onto the brim of your hat.

- The tip of the base clip features a technical-grade claw that snaps onto any attachment's 9.7mm ball joint .

- Print the Base Clip in PETG and every attachment in TPU 95A . Mixing materials this way prevents the wear that happens when two identical plastics rub together, so the joint stays tight over time.

- At the 9.7mm spec, attachments snap in easily but hold firmly at whatever angle you set them.

1 Base Hat Clip, The Foundation

The essential clip required to host every attachment in the system.

Print Settings

- Filament: PETG

- Resolution: 0.2mm

- Infill: 30% (Gyroid recommended)

- Supports: Yes (for mounting points)

- Rafts: No

More printing instructions and individual file:

2 Golf Tee Holder

Keep up to four tees indexed and ready on your hat brim for quick access on every hole. Four precision slots hold standard wooden or plastic tees securely, even mid-swing. STEP file included to adjust the friction-ribs for non-standard tee diameters.

Print Settings

- Filament: TPU 95A

- Walls: 3

- Resolution: 0.2mm | Infill: 30% | Supports: No

More printing instructions and individual file:

3 Image Faceplate

A blank canvas for logos or QR codes to link to your portfolio or socials on the move. Two-part system:

- Image Plate (PETG) : the rigid canvas for designs, logos, QR codes

- Plate Holder (TPU 95A) : the flexible frame that grips the plate and snaps onto the base clip

Fully resizable in your slicer/CAD software. STEP files included for both parts. For QR codes, use high-contrast colors (black on white).

Print Settings

- Filament: TPU 95A (holder) / PETG (plate)

- Walls: 3 | Resolution: 0.2mm (0.1 to 0.12mm for fine text/QR) | Infill: 20 to 30% | Supports: No

More printing instructions and individual file:

4 Magnetic Dock

A print-in-place magnetic staging area for screws, bits, and nails, so there's no more hardware in your teeth! Fully encapsulates a stack of three magnets for a clean finish with no glue required.

Required hardware: 3x neodymium magnets, 20mm diameter x 2mm thick

Assembly, the "Pause-and-Drop" method (important!):

- Program a Pause at Height (or Color Change) in your slicer just before the "roof" of the magnet cavity begins.