1/8" x 3/8" Magnet INDX Tool Dock Core ONE/+

I had to do a lot of troubleshooting to get my printer running after the INDX upgrade, and that involved a lot of dock location calibrations. I was worried about wearing out the cut threads on my original docks, so I decided to make my own docks, but I had a really hard time finding the 3x8 mm magnets in the US. I ordered the 1/8" x 3/8" magnets from the link below and made this dock for them. I have had no issues with loading or unloading the tools using these magnets. I have made 2 versions: one that has the same hole as the standard docks, and another that has a hole meant for 3x4x5 mm heat-set inserts like those used on Voron printers, in case you want a reusable thread.

EDIT: I have added another version for the model that uses heat-set inserts. I made it so there is plastic behind the insert, allowing the screw to bite into it and prevent loosening, while the insert prevents the risk of "stripping" the cut threads.

https://www.kjmagnetics.com/d26-neodymium-cylinder-magnet