POLYZON
Laserpecker Magnetic Shield Joiner
Laserpecker Magnetic Shield Joiner — Image 2 of 6
Laserpecker Magnetic Shield Joiner — Image 3 of 6
Laserpecker Magnetic Shield Joiner — Image 4 of 6
Laserpecker Magnetic Shield Joiner — Image 5 of 6
Laserpecker Magnetic Shield Joiner — Image 6 of 6
3D model · Printables

Laserpecker Magnetic Shield Joiner

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STL
  • 17 Likes
  • 98 Downloads
  • 0 Makes
  • 1 Comments
  • 473 Views

Author:Michael Atkinson

Published

Download on Printables

Description

Joiners for the Magnetic Shields for the LaserPecker laser units as sold by LaserPecker.

The joiners allow to stack the shields one above the other and can be placed around the LaserPecker units to provide extra height protection.

The acrylic of the shields is approximately 2.63mm thick and the joiners are designed as appropriately.

Two are recommended per shield.

Material: Any / PLA Layer Height: Any / 0.3mm Infill: Any but 15%+ recommended

Tags

lplaserpecker2laserpeckerlp2magneticshield
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.