☑️TKS GTR 2s-4s ☑️

TKS GTR Setup 1 :

- TKS frame 3D printed ( NylonX bottom plate , PLA+ Top plate ) ☑️ - Flight Controller TuneRC 1s/2s ☑️ - Happymodel ExpressLRS rx ☑️ - PandaRC Nano VTX ☑️ - FPVCYCLE 13mm 6350kv 2mm Shaft☑️ - HQprops 2.5"x2x3 ( Drill out to from 1.5mm to 2mm ) Can provide the tool ☑️ - 2s 450 mah - 650mah ( Could go up to 4s with a Different FC Firmware ☑️ - Quicksilver ( Preset 2" ) Flash,Bind,Preset,Fly FBPF ! ☑️

TKS GTR Setup 2 :

- TKS Frame 3D printed ( Polymaker PC-MAX , Both Bottom/Top plate ) ☑️ - Flight Controller TuneRC 1s/2s ☑️ - ExpressLRS FYUJON ( RX (ceramic) + VTX ) ☑️ - Happymodel 1102 10000kv ☑️ - HQprops 2.5"x2x3 1.5mm ☑️ - 2s 450mah ☑️ - Firmware Quicksilver ( Preset 2") FBPF ☑️

I highly recommend using M2 motor mount instead of M1.4 ! You can find 1102 with 4 holes motor mount if you want to stick to that size .

Motors Suggestion :

Apex 1103 9999kv ✅

Hyperlite 1204.5 8022kv ✅

Xing Nano 1202 8000-10000kv ✅

FPVcycle 13mm 6350kv 2s/3s ✅

Happymodel 1102 10000kv ( M1.4mm screw ) ✅

Flight Controller :

Tunerc 1s/2s ( Recommended ) ✅

Diatone Mamba 2s/4s ( If you want to push it ) ✅

Happymodel X12 1s/2s AIO ELRS VTX ✅

Kiss Holybro FETtec AIO 15a Kiss Firmware 2s-4s ✅

My favorite setup !

One more flight !

For CNC services :

https://cncmadness.com/ CAN

https://www.jacks3dprinting.com/ USA

Recommended Store :

https://pyrodrone.com/ USA

https://fpvcycle.com/ USA " My favorite motors 13mm 6350kv 2s/3s

https://rotorvillage.ca/ CAN

https://rotorgeeks.com/ CAN

https://www.tunerc.com/ “ The Best Flight controller for 1s/2s ”

https://www.hqprop.com/ Propellers that will last !

Discord (Quicksilver DEV and SUPPORT) awesome community :

https://discord.gg/8StVhvB6Tm

Quicksilver Firmware and Configurator :

https://github.com/BossHobby/Configurator/releases/tag/v0.5.4

Media :

https://www.instagram.com/tarkusx_fpv/

https://www.instagram.com/tarkusx_fpv/