👷‍♂️ Lego man - Bike valve cap

Info:

- another model for valve cap - Lego man this time

Not for presta valve!

Print instructions:

- 0.4mm nozzle works good for me (for my MTB valve), so just print this at 100% scale or adjust slightly. - body 3mf file contains variable layer height, bottom part must be 0.05 layer height so the thread works well - so because of 0.05 layer height this is recommended to be printed separately - also print probably separately: - body + arms in one color of your choice, so his shirt color match sleeves - hands + head are usually yellow - OPTIONAL: eyes black (0.05 layer height) - little supports are only for arms needed, because of arm joint support

Assembly:

- glue eyes on the head - put things together - you will probably need to use sand paper/razor knife to cut some parts (brim connections, arm joint support which will be exceeding probably from the joint)