Camera Arm for Logitech C920 for Prusa i3 Mk3s
Camera Arm for Logitech C920 for Prusa i3 Mk3s — Image 2 of 8
Camera Arm for Logitech C920 for Prusa i3 Mk3s — Image 3 of 8
Camera Arm for Logitech C920 for Prusa i3 Mk3s — Image 4 of 8
Camera Arm for Logitech C920 for Prusa i3 Mk3s — Image 5 of 8
Camera Arm for Logitech C920 for Prusa i3 Mk3s — Image 6 of 8
Camera Arm for Logitech C920 for Prusa i3 Mk3s — Image 7 of 8
Camera Arm for Logitech C920 for Prusa i3 Mk3s — Image 8 of 8
3D model · Printables

Camera Arm for Logitech C920 for Prusa i3 Mk3s

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-ND
Non-commercial use only, with credit and no modified versions.
Formats
STL
  • 34 Likes
  • 309 Downloads
  • 0 Makes
  • 6 Comments
  • 3 159 Views

Author:Alpha

Published

Download on Printables

Description

Camera Arm for Logitech C920 for Prusa i3 Mk3s

You will need 1/4" Bolt and nuts. The one I used was 3/4inch in length. This is the same ones you use for cameras.

You can get away with any other bolt similar size.

Print instructions

Please be careful when you print. Make sure you are printing on flat side down. There is a cable clip on one side. do not print on that side.

0.2mm is good enough for this print. This Camera arm is way better than most other camera arm, it is higher up and adjusted to the right angle, and not need to dissemble the C920.

Tags

prusacamerai3armmk3stripodwebcamlogitechc920

Comments

Loading comments…
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.