POLYZON
Guitar Pick Holder Capo Mount
Guitar Pick Holder Capo Mount — Image 2 of 3
Guitar Pick Holder Capo Mount — Image 3 of 3
3D model · Printables

Guitar Pick Holder Capo Mount

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STL
  • 46 Likes
  • 165 Downloads
  • 1 Makes
  • 3 Comments
  • 1 374 Views

Author:steveprusa1502

Published

Download on Printables

Description

Clip on Guitar Pick Holder for Tiger capo (or similar clones). Holds 3 picks clipped to capo.

Print Settings

Printer Brand:

Prusa

Printer: I3 MK3S

Rafts:

No

Supports: No

Resolution:

0.1mm

Infill: 20%

Filament: prusament PLA galaxy grey

Notes:

print with pick slots vertically - no supports needed. 0.2mm print is probably fine, but may require some cleaning up of the slots

Post-Printing ============= If clips are too stiff, soften part with hair dryer (PLA).

Pick holes work well for my 0.7-0.8mm picks straight off the printer.

If too loose, heat-soften the part, place your picks in the holder and squeeze between fingers until cool. Easy enough to widen with sharp knife but should not be needed

Category: Music

Tags

guitarguitarpickthingiverse
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.