Cloth face mask accessories (sew on)

These models are made for homemade cloth face masks, that you can sew on.

There are 2 models:

- Nose_piece for better sealling of the mask around nose and eyes Nose_piece can be heated with hairdryer and adjusted to fit your nose.

- Tab for tightening the rubber band. This Tab has a gap of 0.3mm between flexible inner part and frame, so maybe you will need to use some force to free the inner part.

I recommend use of PETG or other filaments that can withstand 60°C so you can wash it in washing machine.

Print instructions

Material: PETG or any other filament that can withstand temperatures higher than 60°C

Layer height: 0.15mm or 0.20mm

Supports: No

Brim: Only for Nose_piece

Perimeters: 3 - 4

Infill: 10% - 15%