Torque Wrench Calibration Tool

I designed this tool to calibrate the genial

"Torque Wrench Handles from 1.0Nm up to 3.0Nm"

There is such a tool showed on the fotos, but no file for it added.

https://www.prusaprinters.org/prints/24539-torque-wrench-handles-from-10nm-up-to-30nm

It is designed for a 13mm hexgon nut, but I also added the STEP, so you can easily change it to your liking,

Print instructions

Easy to print:

Layer height: 0,2 mm

Material: PLA

SUPPORTS : NO