POLYZON
Mintion Beagle 1/4" Tripod Adapters
Mintion Beagle 1/4" Tripod Adapters — Image 2 of 7
Mintion Beagle 1/4" Tripod Adapters — Image 3 of 7
Mintion Beagle 1/4" Tripod Adapters — Image 4 of 7
Mintion Beagle 1/4" Tripod Adapters — Image 5 of 7
Mintion Beagle 1/4" Tripod Adapters — Image 6 of 7
Mintion Beagle 1/4" Tripod Adapters — Image 7 of 7
3D model · Printables

Mintion Beagle 1/4" Tripod Adapters

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STL
  • 7 Likes
  • 45 Downloads
  • 0 Makes
  • 0 Comments
  • 468 Views

Author:Wavz3D

Published

Download on Printables

Description

REMIX! Great Design by MyTechFun

Tripod adapter for the Mintion Beagle Camera

UPGRADES:

Added more degrees of tilt

Minimized Hardware / Material

3 Versions:

- Uses a 1/4-20 Nut just like the original model, just more tilt - Super Solid - No EXTRA Hardware needed - Uses Stock Post and Screw - Tripod Diameter is TIGHT enough to start a good thread. - Duplicate of 2, but longer neck for better grip when first threading See pics. Tolerances are tight enough that you use it without any hardware saving weight.

Tripod hole is just big enough that you can barely thread it on by hand and just tight enough that you should be solid for normal use. - Do Not Overtighten - Tolerances are very tight, but plastic can be always be stripped by the Hulk.

Uses STOCK HARDWARE!

No Supports needed

Printed with a .6 in PLA @ .28/.8

NOTE: When using the stock hardware it may “look” short when inserted. This will NOT affect anything. It will compress when you install the screw.

Tags

cameracameramounttripodmountquarterinchcameraadaptertripodadapterbeaglefractioncameratripodmountbeagleprintmintionmintionbeaglecammintionbeagle
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.