Bambu Lab P1P Spool Arm

UPDATE - 01/09/2023

- A member requested a 90° option that hangs to the left. - I have NOT tested the functionality of this version. Use at your own risk. UPDATE - 01/07/2023

- Added extra support to stabilize the spool arm. - Adjusted bottom screw hole. UPDATE - 01/02/2023

- Added a version of the spool arm that extends straight up instead of at an angle. - Removed the original files and replaced them with name changes. - Increased the depth for the M3 nut.

I wanted to see if I could create a spool holder that would sit above the P1P in case you do not have enough free space on the left or right sides. This spool holder design requires minimal support. I do not own an AMS and do not plan to purchase one, so this design is strictly for the P1P without an AMS.

I have only tested it with Printbed PLA 1 kg spools. So far, the spool arm can only be mounted on the left side of the P1P, either in the middle of the printer or the rear of the printer, because the screw hole heights are different on the right side of the printer. When I have time, I will make the changes so the spool holder can be mounted on the right side of the P1P.

The original Bambu metal spool bracket can be used with this spool holder.

- To attach the original Bambu metal spool bracket to the Bambu Lab P1P Spool Arm , I used (2) M3x20mm Socket Head Cap Screws and (2) M3 nuts. - To attach the Improved Rear Spool Holder to the Bambu Lab P1P Spool Arm , I used (2) M3x16mm Socket Head Cap Screws and (2) M3 nuts. - To attach the Spool Arm - Left Middle to the Bambu Lab P1P, I used (1) M4x30mm Socket Head Cap Screws and (1) M4 nut. - To attach the Spool Arm - Left Rear to the Bambu Lab P1P, I used (1) M4x30mm Socket Head Cap Screws and (1) M4 nut, and (1) M3x16mm Socket Head Cap Screw. PARTS BambuLabs X1/X1C Improved Rear Spool Holder https://www.printables.com/model/289720-bambulabs-x1x1c-improved-rear-spool-holder

I welcome any feedback or comments that will help improve the functionality of the spool holder.