[Euro Pegboard] Bosch Professional 12 V Tool Holder
[Euro Pegboard] Bosch Professional 12 V Tool Holder — Image 2 of 4
[Euro Pegboard] Bosch Professional 12 V Tool Holder — Image 3 of 4
[Euro Pegboard] Bosch Professional 12 V Tool Holder — Image 4 of 4
3D model · Printables

[Euro Pegboard] Bosch Professional 12 V Tool Holder

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STEPF3DSTL
  • 10 Likes
  • 76 Downloads
  • 0 Makes
  • 0 Comments
  • 764 Views

Author:Hans

Published

Download on Printables

Description

Simple Bosch Professional 12 V tool holder that slides in the battery compartment.

You will also need 2 M5x6 SHCS.

Optionally, you can add a M5 40 mm screw in the backside as reinforcement. With PLA it shouldn't be necessary but i think with ABS it might. Didn't tested it with ABS, though.

Screw the screws in the holes on the back side. Adjust the depth of the screws so that the friction with the pegboard is just right (= good amount of friction but moveable).

Cad files are attached. Feel free to remix.

Tags

euroboschpegboardpegboardmountwerkzeughalterwerkzeugwandpegboardholderpegboardadapterboschprofessionalbosch12veurolochung

Comments

Loading comments…
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.