Linear rail Bed mount Tronxy xy2 pro

LEVRIERO BED MOUNT

EDIT I'm going to upgrade this part by adding a belt blocking system in order to keep the belts as low as possible

This mount uses 350mm MGN12H linear rail.

You can use the same bolts and nuts from the stock mount.

to home the axis use the bolt of the carrier and remember to put some duck tape on it to prevent shortages.

You might need to adjust the position of the end stop (if you need i also made a new end stop mount https://www.thingiverse.com/thing:5262750 )

it mounts in the same bed carrier holes and in the position as shown in the picture.

Made for Tronxy XY 2 Pro

Print Settings

Printer:

Tronxy XY 2 Pro

Rafts: No

Supports:

Doesn't Matter

Resolution: 0.15mm

Infill:

at least 40%

Filament:

Eryone PETG Glitter Blue

Notes:

- Use a brim (4mm) for the best adhesion, 220° print temp 80° bed temp

Category: 3D Printer Parts