Foot / bracket for a cut / shorten Ikea LACK Table Leg

Here is my simple foot or bracket for an Ikea LACK table with screw hole for use if you want to shorten the size of the legs.

Ikea LACK table legs are hollow after the first 35mm from each end and need a foot or bracket if you want to attached it to a surface.

This model is designed to be a snug fit so it can be pulled apart if required. there is a recess to hide the cut edge. The lip around the bottom edge is 2mm the same as the distance as the holes for fitted the legs provided from Ikea.

I have added a looser fit option as some makers have said it was to snug and remove some of the painted outer layer of the leg. Should of guess not all the legs will have the same tolerances around the world. The looser kit is 10% bigger so the gap for the leg is now 3.1mm wide vs the standard fit of 2.85mm

I use these to create a small shelf between two LACK table tops under an Prusa LACK table Enclosure.