Ikea Lack Spiral stacker/riser

ATTENTION - NOT Tested

Description

When I recently finished the previous stacker, I got an idea for a new design with which I could also try some new modeling techniques and here is the result. I haven't tried printing it and don't plan to. Maybe someone will find it useful and want to try to print it. For these printers - feedback please :)

You can screw the stackers to the legs of the upper table. Holes with a diameter of 4 mm are prepared on the inner sides.

The hole for the table leg is 5x5cm

Stackers increase the space between tables by 10 cm

Printing

Material: PLA or PETG

Layer: 0.2mm

Infill: 20%

Supports: YES!