Toy Steering Wheel (with stand)

Your child want to drive a real car or bike - but is waaaaaay to young? No problem - with this steering wheel!

Just print the wheel & stand and add a screw (6mm diameter / 50mm long / max 14 mm head) with 2 nuts to keep it safe. The wheel is 22cm, the stand is 23cm - scale it down, if you need to, but then keep attention to the smaller screw&nuts…

I've also addded a clamp, maybe for a bed, a cardbox car or … anything else.

Have fun printing - and driving!

___________________________

Printing settings wheel:

noozle: 0.40mm resolution: 0.20mm material: 100g PLA support: no infill: 15% grid time: 2h 50m

___________________________

Printing settings stand:

noozle: 0.40mm resolution: 0.20mm material: 130g PLA support: maybe with tree for the screwhole infill: 15% grid time: 2h 30m