DJControl Inpulse 500 Knobs, Faders and Encoders
DJControl Inpulse 500 Knobs, Faders and Encoders — Image 2 of 8
DJControl Inpulse 500 Knobs, Faders and Encoders — Image 3 of 8
DJControl Inpulse 500 Knobs, Faders and Encoders — Image 4 of 8
DJControl Inpulse 500 Knobs, Faders and Encoders — Image 5 of 8
DJControl Inpulse 500 Knobs, Faders and Encoders — Image 6 of 8
DJControl Inpulse 500 Knobs, Faders and Encoders — Image 7 of 8
DJControl Inpulse 500 Knobs, Faders and Encoders — Image 8 of 8
3D model · Printables

DJControl Inpulse 500 Knobs, Faders and Encoders

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STL
  • 216 Likes
  • 559 Downloads
  • 2 Makes
  • 6 Comments
  • 10 297 Views

Author:Hercules

Published

Download on Printables

Description

Technical information for all model files :

- Nozzle size: 0.4 mm, no Input shaper - Layer height: 0.2 mm (Quality) - Materials used: PLA/PETG - Printer used for prototyping: Prusa MK4 - Type of bed used for prototyping: Textured Notes :

- All printers have different tolerances, we aimed to make a set of files that works on the maximum number of printers but your mileage may vary. - Not compatible with other Hercules controllers except the DJControl Inpulse T7. Safety tips :

- IMPORTANT : BE GENTLE when removing and putting caps back on. - You may need to use a small plastic card or tool to lever them off and remove your original caps. A bit of lube may help the installation. - Do not perform any lateral movement with the caps under any circumstances. - Customize at your own risk!

Tags

knobmusicaudioencoderfaderdjproaudiodjgeardjcontroller

Comments

Loading comments…
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.