Free 
Hook for Bathroom Radiators /Towel heater (20 mm, 22 mm, 23 mm Tubes)
Printables
3D model · Printables
Bathroom radiator spring loaded Kermi towel heater hooks V.2 - 22.5mm
Model details
- Platform
Printables
- Price
- Free
- License
- CC-BY-NC-SA
- Non-commercial use only, with credit; share remixes under the same license.
- Formats
- STL
- 23 Likes
- 126 Downloads
- 5 Makes
- 8 Comments
- 699 Views
Description
Originally, this was an idea taken from the radiator hook design by ramhofer on thingiverse. Thanks for the inspiration! The current version 2 is a complete redesign. It is a litte wider and uses spring load tension to stay fast for a long time. The measurements are made to fit on radiators made by the popular European manufacturer "Kermi". They feature 22.5mm tubes with a spacing of roughly 22.5mm.
If your radiator is different, click here and feel free to copy and modify my design to your liking…
Print Settings
Supports: No Resolution: 0.15 Infill: 20% Filament: PETG or ABS
Notes:
Using two outer shells and with 20% infill each hook needs about 3,5g of material. You can print this in PLA but after some months of use, it will eventually deform, get loose and break.
Similar models
Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.