Prop Replica Wall Hanger for Command Strip

A simple wall hanger/wall mount to be able to hang prop replicas (low weight items would be best).

Designed to accommodate things like the Art Asylum toy Phasers and such.

Put a slight curve to the surface touching the prop. This should allow the prop to be settled on center and keep it from sliding side-to-side.

I would recommend printing at 10percent infill so the weight of the hanger is minimized and reserved for the prop as it will cause pull on the adhesive command strip.

This is for the Large 70x21mm Command strips.

Print Settings

Printer Brand:

Creality

Printer: CR-10S

Rafts:

No

Supports: No

Resolution:

.2mm

Infill: 10 percent honeycomb

Filament: Hatchbox PLA Black

Category: Other