POLYZON
Headphone holder with headphone output (for 3.5 mm jack)
Headphone holder with headphone output (for 3.5 mm jack) — Image 2 of 3
Headphone holder with headphone output (for 3.5 mm jack) — Image 3 of 3
3D model · Printables

Headphone holder with headphone output (for 3.5 mm jack)

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
3MFSTL
  • 10 Likes
  • 40 Downloads
  • 0 Makes
  • 0 Comments
  • 323 Views

Author:earlmckay

Published

Download on Printables

Description

Headphone holder

with headphone output for 3.5 mm jack. Click here for the 6.3 mm version.

Components you need:

- 1 x Jack Plug - 1 x Jack socket - 2 x Screws - Cable (diameter about 3 mm)

Guide

- Define holder position and cable length. - Plug in headphone jack and tighten. - Pull the cable through the hole in the back and solder it (socket and plug on the other end of the cable).

- Screw on the holder. - Arrange cable

Tags

holderdeskhangerheadphonesaudioheadphoneholderheadphonehookheadphonehanger
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.