Flexible Mask Rolley [ Universal Modular System ] Covid-19

Subscribe Now!

Yet another easy printable and usable mask. The shape of this design will cover your chin. Design inspired by an antique TLR. First prototype equip with two extended hooks for strap which looks like the aperture and shuttle dials. Now is a bit too sci-fi.

(Updated 17-Apr-2020: Added 3M and Moldex filter cartridge support) Please always check for update before you do the next print.

[ Breathing Valves | Print time 2.25hrs | inout Filter | 22g | 7-sizes | Remix Template | Future Module Upgrade ]

===================================================== (---- Notice ----)

Why will I not design this mask for printing in PLA or PETG?!

I get quite a few requests to convert this design for printing in PLA or PETG. Sorry, but I am not going to do that, and this is why: In my experience, PLA and PETG are TOO DANGEROUS to put on your face. If a PLA or PETG mask cracks, especially when printed as a light weight/thin wall, it will cut your face like a knife. It may not be happen on the first day, but it will happen one day, maybe while you are talking, and it will be sudden. Thin walled PLA and PETG will fatigue much faster than TPU, being washed, dragged and pulled in daily use. Maybe something hits your mask while you are wearing it, and it splits or shatters.

Let's see poor Kevin in the following videos: For Part 1 in PLA please go here: https://youtu.be/ErP28uP4mVI For Part 2 in PLA please go here: https://youtu.be/LlN01EW9ORI For Part 3 in ABS please go here : https://youtu.be/feWsPd2XUFU For Part 4 in PET-G please go here : https://youtu.be/k-KhRx73NxU

That is why I don't want to convert this design to use PLA/PETG. It is for your safety.

=====================================================

Please be respectful, print it and make it well before making adverse comments. Don't make any judgements based only on skimming around.

(--- DISCLAIMER ---) Print and use it at your own risk.

Uses up to 10mm thickness Filter. Mask weight 22gram.

Key features of this design include: -Separate inlet and outlet valves prolong the lifespan of the intake filter. (humidity of exhaled breath always shorten the filter life) -By design the flexible mask will fit on any face. (Or use hairdryer and scissor for best fitting) -100% infill so no hollow structure, -Modular System for future extension. -Remix template for makers

Only ever use filters you trust. Wash the mask in soapy water for 20 seconds or more when you remove it. Remember that if the filter has protected you against COVID-19, then the virus is now on the outside of the mask or in the filter media, and it can still contaminate you unless/until you kill it first, in soapy water. All in all, I believe your satisfaction with this mask should be limited only by the skill with which you make it, and not by any features of the design.

Hope I won’t see any more comments to this design base on general 3d print issues(rough surface, hollow structure, etc).

=====================================================

HEPA filter mount STL and customizable scad here .

I made this for the community, to help meet a need during the shortage of surgical masks, due to the outbreak of the Covid-19 virus.

Read my PROFILE page if you want to redistribute my design materials to others, for free or commercially.

Good Luck everyone and my love.

Do subscribe to my YouTube channel. Stay tuned on the latest build videos.

All constructive comments and suggestions are welcome.

Tip me a cheese burger and subscribe my YouTube Channel if you like to support my work. https://paypal.me/iczfirz https://www.youtube.com/c/iczfirz

Assemble Animation

Loose sew two discs. Snap on all parts together. (To seal with glue or not? It’s always depends on the makers' handcraft but it is not necessary by design.)

Addiction to 3D Printing? Watch these time-lapse! https://youtu.be/-ZsXFX6hjXk

Subscribe Now!

https://youtu.be/L4IDmn3miE0

https://youtu.be/y3-0Y90HoYo

Need a Goggles, please check https://www.thingiverse.com/thing:4317517

If you have 3M Half Facepiece, please check https://www.thingiverse.com/thing:4264152

If you have Ambu Mask / BVM, please check https://www.thingiverse.com/thing:4260234

Looking for a 3D-printable air purifier device? Here you go >> [Deckman]

Print Settings

Printer:

Bed Size 120 and up

Rafts:

No

Supports: