POLYZON
FPV Drone Wall Hanger (3M Command Strip) [New Design available]
FPV Drone Wall Hanger (3M Command Strip) [New Design available] — Image 2 of 3
FPV Drone Wall Hanger (3M Command Strip) [New Design available] — Image 3 of 3
3D model · Printables

FPV Drone Wall Hanger (3M Command Strip) [New Design available]

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STL
  • 9 Likes
  • 90 Downloads
  • 1 Makes
  • 9 Comments
  • 484 Views

Author:spectrexFPV

Published

Download on Printables

Description

V2 is now available here

Features

- Wall hanger for 3" or larger quads (check your dry weight vs single 3M Command strip max load) - Uses single 3M Command Strip

Print Settings

- Printer: Creality Ender 3 - Filament material: PLA - Resolution: Default or finer - Wall Ordering: Outside to Inside - Supports: No - Infill: 40% - Infill Pattern: Hexagonal/Tri-Hexagonal - Nozzle Temp: 220°C - Bed Temp: 50°C - Print Speed: 100mm/s - Rafts: Doesn't Matter - Notes: Depending on your first layer quality, some sanding and cleaning might be needed for better adhesion. After sanding, rinse and dry. Use any tape to stick off excess dust/particle before applying 3M Command Strip

Tags

wallmountfpv3mwallhanger3inch3mcommandstrips3mcommand5inchfpvdrone3mcommandstripfpvwallmount
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.