Clicky Macaron Spinner

This is a fidget toy with a macaron appearance, and the cream filling clicky rotates. It provides a soft-click sensation and can be rotated with just the fingertips of one hand.

If you're looking for a satisfying clicking sensation try out my other fidget clicker toys.

Customizable click feeling and case design you can choose from:

- Two types of wheels - normal or stiff (I recommend normal)

- Two types of case design - regular or for keychain

Assembly:

- Put the “spring” onto the “caseM” part.

2. Apply a very small amount of PTFE grease or similar to the inside of the “wheel” part.

3. Put the “wheel” on step 1 caseM.

4. Align the notches on both cases and snap-on the opposite side of the case. If printed with a properly calibrated printer, it should be possible to hold and smoothly rotate with the index and middle fingers.

Notes:

- Recommended layer height: 0.15 - 0.20mm , In my case with slicer, layer heights above 0.28mm, the spring, wheel clearance lost are do not function.

- This model may not achieve smooth rotation unless grease is applied to the inside of the wheel.

- Do not use Matte PLA, Silk PLA, as they have weak layer adhesion and can break with snap-on.

Update: [08/01/2024] Case_F_v1.1, case_FK_v1.1 - We received many feedback that the case was rotating. We've fixed it to prevent the case from spinning.

My Other Fidget Toys: https://www.printables.com/@BaGooN/collections/1156349