KP3S (Pro) Microprobe mount

I designed a BIQU MicroProbe mount for the KP3S (Pro, or any model what have a same extruder/fanduct setup as the base remixed model).

The probe is working for me with Klipper and the Kingroon v1.2 board.

Only 2 piece of M3x6 screw is required for mounting to the front panel, the other screws packaged with the MicroProbe.

Setup:

[output_pin probe_enable] pin: PA8 value: 0

[gcode_macro Probe_Deploy] gcode: SET_PIN PIN=probe_enable Value=1

[gcode_macro Probe_Stow] gcode: SET_PIN PIN=probe_enable Value=0

[probe] pin: ^!PA11 deactivate_on_each_sample: False x_offset: -15.3 y_offset: -35.9 #z_offset: 0.0 speed: 5.0

activate_gcode: Probe_Deploy G4 P500 deactivate_gcode: Probe_Stow

[bed_mesh] speed: 120 mesh_min: 5, 5 mesh_max: 167, 152 horizontal_move_z: 5 algorithm: bicubic mesh_pps: 3, 3 probe_count: 5,5