QIDI X-Max 3 / X-Plus 3 camera mount

A camera mount for my QIDI X-Max 3 / X-Plus 3 printers.

Unfortunately the original is currently out of stock.

Other webcams from Logitech had a too narrow FOV or the housing was too big so they can only be placed on the back side (and get a lot of light by that where the video quality suffers).

I found a nice solution from @Kamerton_418898 here https://www.printables.com/de/model/618555-qidi-x-max-3-camera-mount

I thought it has a few downsides and created my own model from scratch that has:

- Camera light protection so that the LED stripe doesnt blind the camera lens (improved video quality) - Screws on the bottom side, because there is limited space on the top side (and looks nicer for me) - Protection caps so that the screws dont scratch the metall part of the printer - Less parts (no nuts, additional screws and washers) - Different mounting base so the angles etc. are slithgly different (fitted better for me) If you like the model of @Kamerton_418898 more, please use his solutioon and he also might like an upvote :)

What you need:

- 2x M4 x 8mm screws (or longer) - 1x M3 x 16mm screw (maximum 18mm long) - Print: 2x_protection_cap.stl - Print: base.stl - Print: camera_bracked.stl - Sunplus Camera (1080p 2.8mm lens) (eg. from here: https://de.aliexpress.com/item/1005005708348092.html )

Instructions:

- Just print in something temperature resistant like ASA/ABS or better. - Assemble everything. - Mount it on the front right side (like the original camera from qidi).