Lamp #4

A honeycomb pattern lamp shade that can use Lamp Base#1,

https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e1.

185 mm height x 85 Width

No supports required.

The fassung-lamp socket ( e14-28 mm): https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch: https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here: https://www.amazon.de/dp/B0B5MPL9MX

The slicer settings for the stand and screw-on cap:

.20 mm Standard and

(All standard settings and speeds, Random seam settings

Filament: Prusament Galaxy Black

The shade itself was printed using a white PLA..

Prusament Vanilla White

The slicer settings:

.16 mm High Quality and Generic PLA Infill % - 30 , Gyroid Wall Loops - 8 Top Shell - 8 Bottom Shell - 6 Outer Wall Speed - 60 mm/s Inner Wall - 150 mm/s

Seam Position- Random