Samla 22L Silica gel container drybox — Image 2 of 16

Samla 22L Silica gel container drybox — Image 3 of 16

Samla 22L Silica gel container drybox — Image 4 of 16

Samla 22L Silica gel container drybox — Image 5 of 16

Samla 22L Silica gel container drybox — Image 6 of 16

Samla 22L Silica gel container drybox — Image 7 of 16

Samla 22L Silica gel container drybox — Image 8 of 16

Samla 22L Silica gel container drybox — Image 9 of 16

Samla 22L Silica gel container drybox — Image 10 of 16

Samla 22L Silica gel container drybox — Image 11 of 16

Samla 22L Silica gel container drybox — Image 12 of 16

Samla 22L Silica gel container drybox — Image 13 of 16

Samla 22L Silica gel container drybox — Image 14 of 16

Samla 22L Silica gel container drybox — Image 15 of 16

3D model · Printables

Samla 22L Silica gel container drybox

Platform: Printables
Price: Free
License: CC-BY-SA; Print, modify and sell with credit; share remixes under the same license.
Formats: STL

55 Likes
148 Downloads
1 Makes
26 Comments
1 853 Views

Author:Frantisek23

Published 2024-05-08

Download on Printables

Description

Update 9.11.2024

Actual version (Version2) of the model you can find here: https://www.printables.com/model/1067544-samla-22l-silica-gel-container-drybox-v2

This version is now deprecated

--------------------------------------------------------------------------

Update 29.10.2024

Based on Makes & Comments I printed test prints to find the solution.

I found that some models were exported incorrectly and could not work. I apologize for that. If you have printed Dryer_Standalone_Body do not throw away. Please print the current version of 96% Dryer_Screw, Funnel, Tube that works. It's not perfect, but it works :-)

In a few days I will make a corrected version of all models.

Until then, I'm removing all models except the repaired ones.

Thank you for your understanding.

------------------------------------------------------------------------------------------

Hi, this is my model of simple storage silicagel containers with holders.

Separated containers for silicagel

- In Samla 22L you can insert up to the 8 separate Silica gel containers - Large silicagel filling hole, secured by a 3d printed screw - Funnel for easy filling, tube for emptying without mess - 20mm tube is good for standard PET water bottle to store silicagel - Big handle and “rails” in holder to fit in place - You can change silicagel in one container at once when regeneration - Up to 8 containers in one Samla 22L box, up to 90g silicagel each container (720g total) - No supports needed :-) - Screw, funnel, tube 99% is OK for most printers. - PETG / PLA, 0.2 mm layer, 15% infill - You can choose the right model / combination for you - Dryer_Standalone_Holder for one, two or four containers Holder you can fix in the Samla box with thin double sided tape.

If you are looking for MMU fillament buffer replace, auto rewind dryer model of Samla 22L - All-in-One - Compact Drybox, MMU2 buffer, Storage, Auto-Rewind for 4 standard filament spools use this link.

If you are looking for Bracket for Thermometer / Hygrometer , use this link

Happy printing

Free