POLYZON
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply — Image 2 of 6
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply — Image 3 of 6
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply — Image 4 of 6
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply — Image 5 of 6
2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply — Image 6 of 6
3D model · Printables

2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STLF3D
  • 7 Likes
  • 22 Downloads
  • 0 Makes
  • 0 Comments
  • 571 Views

Author:mhwlng

Published

Download on Printables

Description

2.5U 19 inch rack front panel mount for AxxSolder 3.0 and mean well LRS-150-24 power supply

These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart.

parts used:

- AxxSolder 3.0 - mean well LRS-150-24 power supply - 4-port d-tap bus splitter - voltage+current meter - rocker switch - Binder 99 0624 00 07 connector (See AxxSolder site) Print the front panel mount / AxxSolder cap on the front.

No support material needed.

The two holes above the AxxSolder 3.0 PCB are dimensioned for M3 heat set inserts.

The two holes below the AxxSolder 3.0 PCB are dimensioned for small self-tapping screws

Included is the f3d file

Blanking plates of various widths and a cover plate for the DAP 2U MP1 bracket are included

Tags

meanwellrackrackmount19inch19inchrackmount
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.