Fuse Pullers

This is a 3D printable pair of fuse pullers for pulling cylindrical fuses out of electrical boxes. Easily printed flat and fully assembled.

!!!!Warning: I am not an electrician or safety engineer. This is a model I designed for personal use and am not responsible for any damage or bodily harm that occurs from electrical short circuit/shock. Print and use at your own risk!!!!!!

Printing instructions:

Recommend printing in ASA, ABS, or any other durable, NON-CONDUCTIVE, material.

Print flat on build plate with preferred layer height.

Recommend printing with at least 4-6 walls.

Infill at 15% or higher set for gyroid pattern.

At least 8mm brim to help prevent warping.

Once printed, carefully pull off build plate and gently pry/twist on the handles and jaws to break the mating surfaces free and operate pliers to ensure they were printed properly.