POLYZON
xLCD Covers (MK4 / MK4S)
xLCD Covers (MK4 / MK4S) — Image 2 of 4
xLCD Covers (MK4 / MK4S) — Image 3 of 4
xLCD Covers (MK4 / MK4S) — Image 4 of 4
3D model · Printables

xLCD Covers (MK4 / MK4S)

Model details

Platform
Printables
Price
Free
License
CC-BY-SA
Print, modify and sell with credit; share remixes under the same license.
Formats
STPSTL
  • 8 Likes
  • 56 Downloads
  • 1 Makes
  • 2 Comments
  • 491 Views

Author:Carrier

Published

Download on Printables

Description

The text heights are adjusted for printing at 0.15mm increments with a 0.2mm first layer —standard on the basic MK4 profiles. Personally, I printed my covers with a 0.25mm nozzle purely for maximum detail on the text (I’ve added photos to the prints).

- Start by printing with black filament; after the first 2mm, switch to white, and finish with orange (as shown in the image below) - Black up to a height of 2mm - White from 2.15mm to 2.45mm - Finish with Orange from a height of 2.6mm to the end

Tags

mk4mk4upgrademk4sxlcdxlcdcovermk4supgrade
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.