Black Myth Wukong

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #23 (1.04mm) swap to Blue Gray At layer #30 (1.32mm) swap to Grey At layer #35 (1.52mm) swap to White for the rest.

If you get the message with the floating regions when slicing... you can ignore this

If you want to resize, scale only x and y. Z must stay as it is