Logitech C920/C270 Z camera mount for Prusa MK3/MK3S+

A simple mount for Logitech C270 or C920 camera.

The design comes with 2 parts:

- The main part which is to be mounted on the left Z stepper. It should fit Logitech C270 as is - The C920 bracket to mount Logitech C920 camera on the C270 place Print without support. I recommend to use at least 4 walls and 30% hex infill for better durability.

There is a small built-in support in the mount near the exit of the cable channel. This is easy to remove using a cutter.

BOM

- M3x12 to mount onto the left Z stepper - Logitech C270 or C920 camera - M3x20 + M3 heat insert or M3x24 + M3 nut If this mount is used for Logitech C270, then you need to print prusa-camera-z part only. The c920-bracket part is an adapter to mount Logitech C920 instead of C270.

Logitech C920 needs to be disassembled using steps 1 to 5 as in the iFixIt manual . The metal supports need to be removed and inserted into the bracket.