Muffin full 3D printed RC airplane

Important!! This project is old and obsolete, you can find the updated project, much lighter and simpler to make that can be printed in LW_PLA at this link: https://cults3d.com/en/3d-model/game/muffin-3d-printed-airplane

Muffin is my own full 3D printed RC airplane. It is tested, so if you want to print it, you can have a very stable and fast model.

About the weight: Like the others full 3D printed rc planes, it's a bit heavy respect a balsa or foam plane having the same dimentions. So it requires a bit of skill during the landing, because of the more speed needed to avoid stalling. To get around this problem, I made an upgrade of this model, built with some balsa wood parts and small tricks, which allowed me to obtain a lighter model aircraft of 300g, which flies like a classic aircraft. The light weight upgrade, is avaliable here: https://www.thingiverse.com/thing:4697586

Istory: Added file "1X + 1X mirrored wing 1 V1.411" with renforced centering pin. Avaliable a light weight upgrade: https://www.thingiverse.com/thing:4697586

Wingspan: 100cm Lenght: 71.5cm Weight in order of flight: 1080g Wing load: 67.5g/Cm2

Needed: 1 x spool of PETG or PLA filament 2 meters of D8mm aluminum tube (I bought it in a brico center) 1 x 2208 1800KV 4S brushless motor (I used one motor recicled from one drone) 1 x 30A 4S ESC 1 X 4S 1400/1500 mAh LIPO battery 3 x 4g servo (I suggest this for ailerons: https://hobbyking.com/it_it/corona-digital-servo-2-2kg-0-11sec-12-5g.html?affiliate_code=ZDFVCEGPTZOFGVZ&_asc=9939418894) Min. 4CH radio control system 1 x 6040 propeller 1 x 2mm steel rod (for landing gear) 2 x 1mm steel push rod (for rudder and elevator control) 1 x 1.5mm steel rod (for elevator) 2 x 2 mm wire hanger for aileron controls (or other) 2 x Clevis for Non Threaded Control Rod 3 x M3x8 self tapping screw 2 x M2x6 self tapping screw 1 X M4 self tapping screw (for wing) 2 x Landing Gear Wheel Stop Set Collar 2mm hole D4mm carbon tube or other, for tail planes assembly Lead or other, for balance the plane CA glue medium density CA spray activator