Creality CR-6 SE Power Off Autoswitch Long-Version

Finally the printer switches itself off after each print :)

This is my rmx from the creality CR6 SE power off autoswitch button.

this one is 25mm longer, then the original one. So u dont need to override the end switches.

Just use this gcode for the end

{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif} G1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print {if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+50, max_print_height-50)} F1500 ; Move print head further up{endif} {if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F1500 ; Move print head further up{endif} G4 S1 M42 P6 S255 ; LED ON G4 S1 M42 P6 S0 ; LED OFF G4 S1 M42 P6 S255 ; LED ON G4 S1 M42 P6 S0 ; LED OFF G4 S1 M42 P6 S255 ; LED ON G4 S1 M42 P6 S0 ; LED OFF G4 S1 M42 P6 S255 ; LED ON G4 S1 M42 P6 S0 ; LED OFF G4 S1 M42 P6 S255 ; LED ON G4 S1 M42 P6 S0 ; LED OFF M140 S0 ; turn off heatbed M104 S0 ; turn off temperature M107 ; turn off fan G1 X227 F1500 M42 P6 S255 ; LED ON G1 X231 F200 M84 X Y E ; disable motors

My end position for the button to switch is x231, but this can vary a little bit. so please pay attention.

For the switches u can use this one https://de.aliexpress.com/item/4000832618404.html?gatewayAdapt=glo2deu&spm=a2g0o.order_list.0.0.21ef5c5fANC5f7