Knipex pliers compatible wall mount

This Design is part of the [OpenHardwareSociety´s tool wall.](https://www.thingiverse.com/openhardwaresociety/collections/34762456/things "OpenHardwareSociety´s tool wall")<br> <br>

** Enhanced parametric OpenSCAD version @ [open pliers wall mount.](https://www.thingiverse.com/thing:7109617 "open pliers wall mount")<br> <br> **

These are Knipex compatible plier wall mounts.

Dies sind Knipex-Zangen kompatible Wand Halterungen.

Compatible with other pliers with the following max. plier head measures.(a few mm smaller pliers should be ok) Kompatibel mit anderen Zangen mit folgenden max. Zangenkopf-Abmessungen.(ein paar mm kleinere Zangen sollten funktionieren)

Knipex 44 11 J1 (15,9mm x 8,3mm) Knipex 03 06 180 (26,1mm x 10mm) Knipex 25 02 160 (16,5mm x 8,2mm) Knipex 25 05 160 (16,5mm x 9mm)) Knipex 26 11 200 (17,9mmx x 9,4mm) Knipex 26 16 200 (17,8mm x 9,4mm) Knipex 26 22 200 (18,2mm x 10mm) Knipex 26 25 200 (18mm x 9,6mm) Knipex 30 11 140 (14,9mmx x 7,7mm) Knipex 35 22 115 (10,9mm x 7,1mm) Knipex 70 01 125 (15mm x 9,5mm) Knipex 70 02 160 (22,8mm x 10,2mm) Knipex 70 05 160 (22,8mm x 10,2mm) Knipex 70 06 160 (22,8mm x 10,2mm) Knipex 70 06 180 (23,4mm x 10,5mm) Knipex 78 61 125 (23,5mm x 8mm) Knipex 97 72 180 (23mm x 11mm)

For **custom** plier mounts open the custom_plier_wallmount.fcstd in freecad(tested with 0.18). change the size in the spreadsheet and export "export_this" from the treeview with strg+e.

Design by Dirk Feyerabend