Klicky Probe Mount for Manta Toolhead, ENDER 5 Version

#Klicky Probe mount for the ender 5, designed to be used with the Manta Toolhead designed by Stephen Boothy.

Drop in replacement for "Rear_Mounting_Plate_E5.stl", requires 3 m3x5x4 heat set inserts, if toolhead already installed, will require disassembly and removal of "Duct_Base_E5.stl" in order to reach nuts holding in the rollers.

#Find other printed parts and Klipper macros on the Klicky Github Page: https://github.com/jlas1/Klicky-Probe Use "Dock_mount_Ender5.stl" found at Klicky-Probe/Printers/ZeroG/Mercury_One/Voron_Toolhead_STL/

#Homing Demonstration Video: https://youtu.be/t_PnN6vl_W4

#Printer Specific Settings:

klicky-variables.cfg: >variable_z_endstop_x: 0 variable_z_endstop_y: 0

>variable_docklocation_x: 55 :Depends on what your max bed dimensions are set as, variable_docklocation_y: 223 ;mine set at (230,225) variable_docklocation_z: -128

>Variable_dockmove_x: -40 Variable_dockmove_y: 0 Variable_dockmove_z: 0

>Variable_attachmove_x: 0 Variable_attachmove_y: 30 Variable_attachmove_z: 0

printer.cfg: >[stepper_z] step_pin: PB6 dir_pin: PB5 enable_pin: !PC3 microsteps: 16 rotation_distance: 4 endstop_pin: probe:z_virtual_endstop position_min: -10 position_max: 250

>[probe] pin: ^PA7 x_offset: 13 y_offset: 11

>[screws_tilt_adjust] screw1: 17, 12 screw1_name: front left screw screw2: 189, 12 screw2_name: front right screw screw3: 189, 182 screw3_name: rear right screw screw4: 17, 182 screw4_name: rear left screw horizontal_move_z: 10 speed: 200 screw_thread: CW-M3

>[bed_mesh] speed: 50 horizontal_move_z: 7 mesh_min: 30, 23 mesh_max: 192, 193 fade_start: 0.4 fade_end: 10 probe_count: 4, 4

>algorithm: bicubic relative_reference_index: 12

#Big thanks to Boothy and jlas1/the team working behind klicky!