Soviet siderail optics to picatinny adapter

Because Thingiverse is bugged, please download from my printables:

https://www.printables.com/model/308372-soviet-siderail-optics-to-picatinny-adapter

Picatinny siderail adapter

### Description/ Instructions This adapter allows you to mount your Soviet siderail mounted optics to western picatinny rail interfaces. There are 3 adapters included, one for a vertical picatinny rail, one for a horizontal rail and one for a horizontal rail, for mounting the scope as close to the rail as possible. The stepped down adapter allows you to mount the pso Scope as close o the top reciever of a M4 as possible, to allow normal viewing through the scope.

### Needed materials

per adapter youll need: 3x M5 Bolt (overall Length 35mm, Thread lenght 30mm) 3x M5 Nut

### compatibility tested with PSO-1 (original) PSO-1 (repro)

### Printing You should have a pretty good calibrated printer to start with, specific settings aren't that important, as this adapter recieve to much stress. I printed my example with a wall count of 30, but i don't believe this is really necessary. The reccomended print oriantation can be seen in the "print orientation.png" in the media folder. After printing remove the supports structures and either assemble the adapter over the picatinny rail or slyde it over and then add the screws and nuts.

printer settings nozzle size 0,4mm layer height 0,2 Nozzletemp 205-225 (whatever works for you) Bedtemp 60 (whatever works for you) walllinecount 16 (whatever works for you) supports enabled