Delta BLTouch Effector (V6 Volcano)

<h1>Description</h1>

Here is my new design for a delta/kossel effector. It uses the parts that came with my kit with the addition of a BLTouch. I didn't like or see any design that integrated the BLTouch how I wanted it. This is why I made this design. The part cooling isn't the best, but I wanted to reduce the noise from the 5010 blower fans that I had previously. This effector has a rod spacing of 55mm. You can also download the carriage I designed : https://www.thingiverse.com/thing:5805426.

<h1>BOM</h1>

Here is the BOM for my setup :

- E3D v6 Clone with Volcano Upgrade - 30x30x10mm Hotend Fan - 40x10mm Radial Fan - BLTouch - M3x12mm x4 - M3x8mm x8 - M3x20mm x2 - M3x25mm x6 - M3 Locknut x8 - M2.5x15mm x4

See the other section for print settings, post-printing and assembly.