Starlink Mini Yakima Jetstream Mount

I created a pole mount to attach a Starlink Mini using the factory Starlink Mini pipe mount to a Yakima Jetstream crossbar on top of my Hallmark popup truck camper. I used two pipe clamps and some 3M VHB outdoor double sided tape to secure the mount to the crossbar. I have not and do not intend to drive the vehicle with it attached but only use it while I'm stationary. I have a roof vent on the camper that I open and lift the Starlink Mini thru and mount it to the adapter on the crossbar. I also attached a 24V power outlet inside the roof vent and am able to route the power cable out of the vent even with the vent closed most of the way during rain and snow. I could have mounted a weathered power plug externally on the roof vent but decided on the internal power plug as a reminder so when I try to close the vent before travel i physically have to remove the Starlink power cable, hence never forget and leave it up there.

Printed on a Lulzbot Taz Workhorse with M175 V2 0.5mm printhead using 0.25mm layer height and Polymaker PolyLite ASA material.