Flexi ReinD Snek

**Articulated snake-like toy with a head of a Reindeer**

Files prepared for a **single color**, **printing in parts** in 2-3 colors and for **multicolor printers**

124mm long (86mm in short version)

**Not for small kids (0-3yo)**

---

Connectors based on my Capy Snek but body is different Head based on my Reindeer Phone Stand (it's smaller and with some more changes)

---

**If you want to sell prints of this models you can buy a commercial license** https://cults3d.com/en/3d-model/various/flexi-reind-snek-commercial-license

More Xmas models: https://www.thingiverse.com/C47_3D/collections/17109714/things

---

**ARC** This is the same model as original but segments are arranged in an arc to use more square space Use this model if you want to print ReinDSnek as big as you can on your printer

**KEYRING** Last segment is with a hole for a ring or a string You can use is as a keyring or hang it on your xmas tree

**MULTI** For multicolor printers Select ReindSnek (or short version), MULTI_dark-brown and MULTI_red and move all 3 files to your slicer You will be asked if it's a single object in multi parts - click YES Then just change colors of _dark-brown and _red and print - you can use different colors than suggested

MULTI models are with a frame that will not be printed. It will help you line it up with base model to set them in exacly same place

**PARTS** Files for printing in parts and assembling (glue is recommended if a toy will be used by smaller kids) Select Body part of your choice and print him a Nose and Antlers

Original Body models are with holes for eyes. Use a 1.75mm filament in there or just leave it as it is. You can also use Eyes-addon to fill the holes in slicer (will be the same color as body)

For assembling Antlers and eyes I recommend to use a pliers Push Antlers all they way up to a little thicker part

**SHORT** Shorter version of ReinDSnek 12 segments instead of 20

---

**Video:** https://www.instagram.com/p/DDW-pUBtWTv/

---