POLYZON
Universal filament spool roller stand (for most spool widths)
Universal filament spool roller stand (for most spool widths) — Image 2 of 18
Universal filament spool roller stand (for most spool widths) — Image 3 of 18
Universal filament spool roller stand (for most spool widths) — Image 4 of 18
Universal filament spool roller stand (for most spool widths) — Image 5 of 18
Universal filament spool roller stand (for most spool widths) — Image 6 of 18
Universal filament spool roller stand (for most spool widths) — Image 7 of 18
Universal filament spool roller stand (for most spool widths) — Image 8 of 18
Universal filament spool roller stand (for most spool widths) — Image 9 of 18
Universal filament spool roller stand (for most spool widths) — Image 10 of 18
Universal filament spool roller stand (for most spool widths) — Image 11 of 18
Universal filament spool roller stand (for most spool widths) — Image 12 of 18
Universal filament spool roller stand (for most spool widths) — Image 13 of 18
Universal filament spool roller stand (for most spool widths) — Image 14 of 18
Universal filament spool roller stand (for most spool widths) — Image 15 of 18
Universal filament spool roller stand (for most spool widths) — Image 16 of 18
Universal filament spool roller stand (for most spool widths) — Image 17 of 18
Universal filament spool roller stand (for most spool widths) — Image 18 of 18
3D model · Thingiverse

Universal filament spool roller stand (for most spool widths)

Model details

Platform
Thingiverse
Price
Free
License
CC-BY-SA
Print, modify and sell with credit; share remixes under the same license.
  • 351 Likes
  • 1 465 Downloads
  • 0 Makes
  • 67 Collected
  • 4 Comments
  • 8 300 Views

Author:BenjaminW

Published

Download on Thingiverse

Description

Needed one of these to go next to my printer, and since I had some low-quality ball bearings to use up, I designed this one. It works for most spool widths without adjusting width or anything.

The bearings I used are 5x10x4mm (MR105 I think) and the whole thing is held together by two 5.0 x 80 mm wood screws. I also used some 2.65mm diameter pins for alignment, but you can probably skip these.

FreeCAD source included for easier modding, If you don't have bearings this size, you can probably just make it a plastic-in-plastic bushing.

Tags

filamentfilament holderfilament spool holder
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.