Magicubic HY300 Pro - Projector Wall & Ceiling Mount

This is my Mount for the Magicubic HY300 Pro Projector.

It was a quick project and I didnt invest much time in it. The mount itself is quite simple, after screwing it to the place of choice, just slide the projector in. The projector is not secured in place, adjust the fit of the baseplate with the depth of the screws used, so that the rubberized foot of the projector clamps on to it. Please be careful when putting it together, so that your projector doesn't fall out. Also pay attention to the HDMI and USB ports on the back, in case you turn the stand of the projector - I almost broke mine because I bent it too much. Two screws was enough for me but I added four screwholes, just in case.

If you have ideas or improvements, feel free to remix it. I might update the design later on.

Printing: You will need to use supports and find settings that will let you remove the supports easily, so that the top plates of the mount dont break off while removing the supports. I used PETG in case the projector heats up but I think PLA will work aswell.