Vehículos

Cold Intake 3D Models and STL Files for TSI Engines

The collection gathers 3D models for cold-side intake work on turbocharged engines: adapters that join a filter to the factory pipe, snorkels that pull air from the front of the car, and housings that hold the airflow sensor. Files are shared as STL and similar formats for 3D printing at home. It helps when a stock air box is hard to source or when you want to test a shape before committing to a metal part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 47 modelos de 6 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 262271 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 262271 modelos
Sobre la categoría

«Cold Intake 3D Models and STL Files for TSI Engines»

The parts fall into a few groups. Adapters sit between the filter and the existing pipe and differ mainly in the diameter they accept and the bolt pattern they match. Snorkels and scoops route air from the grille or bumper area, while air-box replacements and sensor housings take over a whole section of the intake path. Some pieces are simple rings or flange plates, others are multi-part assemblies with brackets.

Before printing, look at how the part is loaded: a piece that only guides air behaves differently from one that sees boost pressure or engine-bay heat. Check the wall thickness, the material and settings the author lists, and whether the model is split into several parts that need joining. Photos of real prints and a stated scale or measured dimensions tell you more than a render. Also see whether supports are needed and how the part is oriented on the bed.

Search results widen quickly, so try several wordings: intake pipe, snorkel, scoop, air box, sensor housing, adapter, flange, velocity stack. Adding the engine code or platform name narrows the list, and related terms such as intercooler piping, filter mount or engine-bay bracket bring up parts that sit next to the intake. If a result set is thin, drop the model name and search by part function instead.

FAQ

Preguntas frecuentes

Which filament works for an intake part in the engine bay?
Parts near the engine see heat and vibration, so many makers use ABS, ASA, PETG or nylon rather than standard PLA. Check what the author lists for the specific model and where the part sits in the bay.
Do printed intake parts need supports?
It depends on the geometry. Round adapters and rings often print without them, while snorkels and ducted shapes may need supports inside the channel. The model page usually shows the orientation the author used.
How do I check that an adapter matches my engine?
Compare the inner diameter, the bolt spacing and the sensor opening with measurements from your own car. A printed test piece in a cheap material is a common way to confirm the fit before a final print.
Can a printed snorkel work with the stock air box?
Sometimes, if the outlet matches the box inlet and there is room in the bay. Check the dimensions on the model page and whether the author shows it fitted to a standard box.
Relacionado
Vehículos

1.4 TSI Intake 3D Models and STL Files

2473 modelos
Vehículos

Cold Intake 3D Models: STL Ducts, Scoops and Adapters

2555 modelos
Vehículos

Admisión de aire frío Ford Focus para imprimir en 3D

3028 modelos
Vehículos

Admisión de aire frío para VAZ 2110 en modelos 3D

63802 modelos
Vehículos

Cold Air Intake 3D Models and STL Files

2606 modelos
Piezas para impresoras

Cold Air Intake 3D Models and STL Files

3042 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías